Vision Fitness E4000 User Manual download pdf (Page 18)

GENERAL

TROUBLESHOOTING

Our Bikes are designed to be reliable and easy to use. If, however, you

have a problem, these troubleshooting steps may reveal the cause.

PROBLEM: No display on your console.

SOLUTION: Check to make sure the batteries are orientated correctly (+/-).

SOLUTION: Remove the console and check your cable connections, make

sure the connections are secure and in the correct orientation.

SOLUTION: Check to make sure the cables are not pinched or damaged.

PROBLEM: The TIME function works properly, but the RPM function does

not work.

SOLUTION: Remove the console and check your cable connections, make

sure the connections are secure and in the correct orientation.

SOLUTION: Check to make sure the cables are not pinched or damaged.

SOLUTION: If you find no problems with the cables or connections it is likely

that there is an internal problem with the speed sensor or magnet alignment.

PROBLEM: There is no resistance change when you turn the tension knob.

SOLUTION: Remove the tension knob and check to make sure the cable

from the knob is connected and seated to the cable coming from the frame.

PROBLEM: The Bike does not sit level.

SOLUTION: Adjust the levelers on the bottom of the rear stabilizers to assure

the product sits level on uneven surfaces.

PROBLEM: The seat moves, or is unstable.

SOLUTION: Make sure the adjustment knob is locked into a hole on the

seat post.

SOLUTION: Make sure the seat post is tight by turning the adjustment knob

to the right.

SOLUTION: Make sure the seat is securely fastened to the seat post by

checking the seat mounting nuts on the bottom side of the seat. Use a 13mm

wrench and turn clockwise to tighten.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

No comments

Vision Fitness E4000 User Manual Page 18