Vision Fitness T8500HRC Owner's Manual download pdf (Page 9)

PART 2 - GETTING STARTED

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using an electrical product, basic precautions should always be followed, including the following:

Read all instructions before using this Vision Fitness Treadmill.

WARNING!

Connect this appliance to a properly grounded outlet only. See grounding Instructions.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least

resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord

having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appro-

priate outlet that is properly installed and grounded in accordance with local codes and ordinances.

DANGER!Improper connection of the equipment-grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is

properly grounded. Do not modify the plug provided with the product - if it will fit the outlet, have a proper

outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus-

trated in sketch A below, Page 5. A temporary adapter that looks like the adapter is illustrated below may

be used to connect this plug to a 2-pole receptacle as shown, if a properly grounded outlet is not available.

The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified

electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a

permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be

held in place by a metal screw.

PART 2

Getting Started

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 42 43

No comments

Vision Fitness T8500HRC Owner's Manual Page 9