Vision Fitness E4000 Owner's Manual download pdf (Page 6)

10 11

TEFLON WASHER(O)

Φ15.9xΦ28.4x1.0T

Qty:4

FLAT WASHER(P)

Φ8.4xΦ17.0x1.0T

Qty:2

BOLT(Q)

M8x70 mm

Qty:2

NUT(R)

M8X1.25P

Qty:2

SPRING WASHER (B)

Φ8.2xΦ15.4x2.0T

Qty:2

RUBBER WASHER(L)

Φ16.2xΦ26.2x11.5T

Qty:2

FLAT WASHER(M)

Φ16.0xΦ25.0x1.5T

Qty:4

SPRING WASHER (B)

Φ8.2xΦ15.4x2.0T

Qty:2

BOLT(I)

M8x20 mm

Qty:2

FLAT WASHER(N)

Φ8.6xΦ26.0x2.0T

Qty:4

ASSEMBLY STEP 5 ASSEMBLY STEP 6

A Open HARDWARE FOR STEP 6. Remove zip tie

securing axle in LOWER LINK ARM.

B Align end of LOWER LINK ARM with bracket on

bottom of LOWER HANDLEBAR.

C Place TEFLON WASHERS (O) on both sides of

the LOWER LINK ARM. While holding TEFLON

WASHER (O) slide LOWER LINK ARM into bottom

end of LOWER HANDBAR.

D Secure the joint with 1 FLAT WASHER (P), 1

SPRING

WASHER (B), 1 BOLT (Q) and secure

with 1 NUT (R).

E Repeat steps B-D on the opposite side of the

elliptical.

HARDWARE BAG 6 CONTENTS :

A Open HARDWARE FOR STEP 5.

B Slide 1 RUBBER WASHER (L) and 1 FLAT WASHER

(M) onto the CONSOLE MAST.

C Slide LOWER HANDLEBAR onto CONSOLE

MAST and attach using 1 FLAT WASHER (M),

1 FLAT WASHER (N), 1 HANDLEBAR CAP, 1

FLAT WASHER (N), 1 SPRING WASHER (B)

and 1 BOLT (I).

D Repeat steps B-C on the opposite side of the

elliptical.

HARDWARE BAG 5 CONTENTS :

CONSOLE MAST

RUBBER WASHER(L)

FLAT WASHER (M)

FLAT WASHER (N)

BOLT (I)

SPRING WASHER (B)

LOWER HANDLEBAR

LOWER HANDLEBAR

NUT (R)

TEFLON WASHER (O)

FLAT WASHER (P)

SPRING WASHER (B)

BOLT (Q)

LOWER LINK ARM

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Comments to this Manuals

No comments