Vision-fitness T9300 User Manual download pdf (Page 43)

GENERAL

TROUBLESHOOTING YOUR TREADMILL

Our Treadmills are designed to be reliable and easy to use. If, however,

you have a problem, these troubleshooting steps may indicate the cause.

PROBLEM: The Console does not light up.

SOLUTION: Check to make sure the Treadmill is connected to a

functioning outlet, and that the Treadmill is turned on.

PROBLEM: The Treadmill’s built-in circuit breaker trips repeatedly,

shutting-off for no apparent reason.

SOLUTION: The lubricating wax coating on the deck is wearing down

and needs to be replenished; contact your VISION FITNESS retailer.

PROBLEM: The Treadmill shuts off when elevated.

SOLUTION: Check to make sure that the power cord is not stretched so

tight that when the Treadmill is elevated the cord is pulled out of the wall

outlet.

PROBLEM: The running belt does not stay in the center of the Treadmill

when you are running on it.

SOLUTION: 1) Check to make sure the Treadmill is level. 2) The running

belt is loose and needs to be properly tensioned (see Page 44 for proper

procedure).

PROBLEM: The belt moves within 1/4” of -- but does not touch -- the side rail.

SOLUTION: There is nothing wrong, this is normal and will not cause any

damage.

NOTE: If the above steps do not remedy the problem, discontinue use, turn

the power off and contact your VISION FITNESS retailer.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

No comments

Vision-fitness T9300 User Manual Page 43