System Installation/Setup
PowerNet Twin Client Reference • September, 2003
2-4
Click on Add.
The
Terminal Type scroll box is used to override the existing emulation type.
To do a DNS lookup, enter the name of the server, and click on the
Lookup button.
Note:
The DNS server must be running on the PC for this to work.
To set these addresses from the
Settings menu, click on Servers and then click on Add.
Enter the name of each server, its IP Address and IP port (normally 23 for Telnet
servers), and emulation type. Then click on
OK.
Repeat this step for each telnet server the terminals are required to access. If an error is
made in the name, IP Address, IP Port number, or Terminal emulation type, click on the
line that is in error and then click on the
Edit button to make the corrections.
Use the Load button if you want to load an .svr file. Use the Save As button if you want
to save your file as an .svr file.
You are now ready to download the program and configuration files to the terminal.
Comments to this Manuals