Vision Fitness R44 User Manual download pdf (Page 30)

Configuring Options

PowerNet Twin Client Reference • September, 2003

3-8

Configuring with the Scanner Tab

The Scanner tab gives you the capability of determining how the RF terminal scanner

performs when it interacts with the host application.

Send Key

Using this key allows you to set up an automatic transmission of data once the field is

filled. For instance, if you are scanning inventory, after each swipe that scans in a

product code, the send key becomes active and causes the product code to be sent

automatically. You can choose among

Enter and 24 PF keys and others (this is the value

that is added to the end of the actual scanned data to indicate the end of a field…)

Scan Ahead

This scrolling list option defines the number of scans that can be transmitted by the

terminal without a response from the host system. The maximum is 24.

Set to 0, scan ahead is disabled and you cannot scan again until the host response has

been received.

Set to 1, there is no scan ahead limit.

Set to 2 and above, and the software will let you scan that many times until a host

response is received. So if you set it to 3, it will allow you to scan only 2 more times

before the host responds to the first scan.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 97 98

No comments

Vision Fitness R44 User Manual Page 30