Vision Fitness R44 User Manual Page 57
- Page / 98
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Designing Scanner Objects
PowerNet Twin Client Reference
•
September, 2003
4-15
UPC-A
PowerNet TN Extended Command:
<ESC>[?13;<state>;0;0;0z
•= State: Disable/enable UPC-A scanning. 0=disabled, 1=enabled.
UPC-E0
PowerNet TN Extended Command:
<ESC>[?14;<state>;0;0;0z
•= State: Disable/enable UPC-E0 scanning. 0=disabled, 1=enabled.
UPC-E1
PowerNet TN Extended Command:
<ESC>[?15;<state>;0;0;0z
•= State: Disable/enable UPC-E1 scanning. 0=disabled, 1=enabled.
Supplemental Barcode Handling (UPC/EAN) Options
PowerNet TN Extended Command:
<ESC>[?12;<state>;<minlen>;<maxlen>;<depend>z
•= State: This flag should always be set to one.
•= Minlen: Specifies if two character supplementals are enabled/disabled (only
applies to transmit mode 1). 0=no codes with two character supplementals decoded,
1=codes with two character supplementals decoded.
•= Maxlen: Indicates if five character supplementals are enabled/disabled (only
applies to transmit mode 1). 0=no codes with five character supplementals decoded,
1=codes with five character supplementals decoded.
•= Depend: Specifies the supplemental transmit mode. 0=no supplementals
transmitted to host, supplemental enable/disable ignored. 1=only codes with the
appropriate supplemental (from minlen/maxlen) decoded. 2=all codes sent as is,
supplemental enable/disable ignored.
Disabling All Decoders
PowerNet TN Extended Command:
<ESC>[?z
This command is used to disable all barcodes on the handheld. Typically this would be
issued before turning on an individual barcode type just to make sure of the state of the
active barcodes.
Determining Input Mode
The input mode parameter sent from the application controls (via the host application)
decides whether the terminal accepts input from the keyboard, the scanner or both.
- Twin Client Reference 1
- Trademarks 2
- Production: 2
- Chapter 1 • Introduction 5
- Opening Screen 7
- Toolbar 7
- In This Manual 8
- Keys and Buttons 9
- Related Documents 9
- Introduction 10
- September, 2003 11
- Selecting Terminal Types 12
- September, 2003 13
- System Installation/Setup 14
- Edit Mobile Unit IP 15
- Edit Server/Host IPs 15
- Run Site Survey 16
- Switch Client Modes 16
- Set Contrast 16
- Edit Radio Option 16
- Authorizing PowerNet 17
- Authorized Terminals 18
- Add Licenses 19
- Transfer Authorization 21
- Listing 22
- Overview of Configuring 23
- Save As from the File menu 24
- Open from the File menu 24
- Auto EOF (3270,5250 only) 26
- Clear First (3270,5250 only) 26
- Advanced (3270 only) 26
- Quadrant Mode 27
- Scroll Mode 27
- Language 27
- Cursor Appearance 27
- Mapping Object 27
- Configuring Options 28
- Formatter Object 29
- Alt Scan Key 29
- Advanced Key (VT/HP only) 29
- Send Key 30
- Scan Ahead 30
- Scanner Type 32
- General 32
- Display 32
- Formatter 32
- Configuring the Timers Tab 33
- Keepalive (3270, 5250 only) 34
- Volume 35
- Allow Multiple 36
- By Attribute (for 3270 only) 36
- Alternate (5250 only) 37
- End Convert 39
- LXE Option 39
- Conversion (3270 only) 39
- Using the Miscellaneous Tab 40
- (vt100, vt220, hp700 only) 41
- Chapter 4 • Advanced Options 43
- Designing Keyboard Objects 44
- Advanced Options 46
- Keyboard Macros 47
- Using Octal Values 48
- Designing Scanner Objects 50
- Scanner Data Editor 51
- Scanner Decoder Control 53
- Extended Commands 54
- CODE 11 Control 55
- CODE 128 55
- CODE 39 55
- CODE 49 55
- CODE 93 55
- D 2 of 5 56
- INTERLEAVED 2 OF 5 56
- PLESSEY/MSI 56
- <ESC>[?z 57
- Designing Display Objects 59
- Designing Printer Objects 60
- Designing Dialog Objects 61
- Screen Capture 63
- Keyed Input 65
- Multiple Fields 65
- Key Wrap 65
- Attribute Mask 65
- Field Mask 65
- Blink Mask 66
- Extension 67
- Creating Common Settings 68
- Saving New Environ Settings 69
- TN3270E Negotiation 69
- New Environ Negotiation 70
- Setting the Emulation 71
- Starting the Emulator 72
- September, 2003 6-3 73
- Taking Snapshots 74
- Formatting 75
- Setting Up the Formatter 76
- Copying an Input Field 77
- Adding an Input Field 77
- Keyboard Mapping 78
- Deleting a Field 79
- Removing an Ident 80
- Adding an Ident 80
- First Screen from the Host 81
- Adding a Terminal Screen 83
- Deleting a Screen 83
- Saving the Formatter Object 84
- TN Plus Formatting 85
- September, 2003 6-15 85
- Chapter 7 • TN Plus Features 87
- September, 2003 7-3 89
- September, 2003 7-5 91
- September, 2003 7-7 93
- Chapter 8 • Printer Support 95
- VTerm Handler Configuration 96
- September, 2003 8-3 97
- Printer Support 98
Related products and manuals for Bicycles Vision Fitness R44
Bicycles Vision Fitness R64 Service Manual
(70 pages)
(70 pages)
Bicycles Vision Fitness R45 User Manual
(2 pages)
(2 pages)
Bicycles Vision Fitness E4100 User Manual
(72 pages)
(72 pages)
Bicycles Vision Fitness R40 User Manual
(17 pages)
(17 pages)
Bicycles Vision Fitness E4100 User Manual
(12 pages)
(12 pages)
Bicycles Vision Fitness R2200HRT User Manual
(52 pages)
(52 pages)
Bicycles Vision Fitness R2600HRT User Manual
(44 pages)
(44 pages)
Bicycles Vision Fitness X6200HRT User Manual
(40 pages)
(40 pages)
Bicycles Vision Fitness R2200HRT User Manual
(64 pages)
(64 pages)
Bicycles Vision Fitness R50 Owner's Manual
(21 pages)
(21 pages)
Bicycles Vision Fitness R2600HRT User Manual
(56 pages)
(56 pages)
Bicycles Vision Fitness R68 User Manual
(15 pages)
(15 pages)
Bicycles Vision Fitness X6200HRT User Manual
(72 pages)
(72 pages)
Bicycles Vision Fitness R2050 User Manual
(72 pages)
(72 pages)
Bicycles Vision Fitness E3200HRT User Manual
(60 pages)
(60 pages)
© 2020, manymanuals.com. All rights reserved. | 0.164 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals