26
7.4 HEART RATE GRIPS REPLACEMENT
CHAPTER 7: PART REPLACEMENT GUIDE
FIGURE A
1) Remove the 2 screws holding the 2 sides of the heart rate grip together (Figure A).
2) Remove the heart rate grip from the heart rate handlebars (Figure B).
3) Reverse Steps 1-2 to install new heart rate grips. NOTE: The white wire goes to the bottom heart rate plate, the red wire goes to the top
heart rate plate. Also be sure to re-install both heart rate grip end caps.
4) Test the bike for function as outlined in Section 7.14.
FIGURE B
Comments to this Manuals