Vision Fitness U70 Service Manual download pdf (Page 41)

7.11 GENERATOR BELT REPLACEMENT - CONTINUED

9) Once the generator belt is removed from around the pulley on the secondary pulley assembly, the generator can be pulled towards the front

of the unit so that the generator belt can be removed from around the generator pulley (Figure I).

10) Once the generator belt is removed from around the generator pulley, the secondary pulley assembly can be slid toward the rear of the unit

so that the generator belt can be completely removed from the secondary pulley assembly (Figure J).

11) Reverse Steps 1-10 to install a new generator belt. NOTE: Be sure to tension the new generator belt so that it can be twisted a maximum

of 45 degrees (Figure K).

12) Test the bike for function as outlined in Section 7.14.

FIGURE K

FIGURE JFIGURE I

CHAPTER 7: PART REPLACEMENT GUIDE

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 56 57

No comments

Vision Fitness U70 Service Manual Page 41