48
8.3 ASSEMBLY INSTRUCTIONS - CONTINUED
CHAPTER 8: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
STEP 4 - CONSOLE
1) Remove the four mounting bolts from the back of the console and four screws holding the console back cover on with the Phillips
Screwdriver. Plug in the wire harness and the two heart rate wires to the back of the console. Attach the console to the console mast with the
four bolts removed earlier in this step.
2) Plug in the 9 volt battery. Re-attach the console back cover with the four screws removed previously.
3) With the Phillips Screwdriver, remove the 2 bolts located half way up the console mast. Attach the accessory tray to the console mast the two
bolts.
Comments to this Manuals