32
7.9 LOWER CONTROL BOARD REPLACEMENT
1) Remove both side covers as outlined in Section 7.8.
2) Remove the 2 screws holding the lower control board to the frame (Figure A).
3) Disconnect the 3 wire connections at the lower control board and remove the board (Figure B).
4) Reverse Steps 1-3 to install a new lower control board. NOTE: Be sure to re-attach the 3 wire connections removed in Step 3 (Figure C).
5) Test the bike for function as outlined in Section 7.14.
FIGURE A
FIGURE B
FIGURE C
CHAPTER 7: PART REPLACEMENT GUIDE
Comments to this Manuals